Mobile/Wechat/Whatsapp:

optimization of tire pyrolysis plant

2022-12-02

The energy saving optimization of tire pyrolysis equipment mainly includes the following four aspects:

 

1. Energy saving optimization of steam pipe network of tire refining equipment mainly adopts the optimization design and balanced scheduling of steam pipe network. The main means of energy-saving optimization of steam pipe network include optimization design of steam pipe network based on mathematical programming method, simulation of steam pipe network, analysis and optimization of energy-saving diagnosis, intelligent dispatching technology of steam pipe network, etc.

 

2. Energy saving optimization of steam power system of tire refining equipment includes two aspects: comprehensive design energy saving and operation optimization energy saving. The main methods of energy saving in comprehensive design include pinch point analysis, mathematical programming and three ring method. The main energy integration means is combined power and heat production, which adopts the technology of combined power and heat production of gas, boiler and industrial heating furnace. Operation optimization and energy saving are mainly based on mathematical planning and various intelligent search algorithms.

 

3. Save energy with steam. In the production of oil refining equipment, the end use of steam is widely distributed in various technological processes. Improving the efficiency of steam equipment can directly reduce the whole energy consumption.

 

4. Condensate and its heat recovery technology is also an important aspect of energy saving and optimization of steam system in refining equipment.

Key points of slag removal and optimization of tire refining equipment

 

There are several methods for the customers to choose: discharging the slag into the carbon black box, lifting it with the spiral tube, pumping it out with the vacuum extractor, injecting water into the pit, pumping it out with the mud pump or flushing it out with water. The slag removal system of refining equipment is equipped with spiral plate to discharge carbon black or slag, and built-in spiral plate, slag removal door, dust-proof slag removal door and slag removal tank. Sealed with water, quick recycling, no pollution, no dust emission. Problems to be noticed during slag removal: before slag removal, workers must wear long sleeved overalls and safety helmets, first open the slag removal door outside the furnace, use special tools to remove the screws on the slag removal cover of the reactor, and then loosen the two bolts, slightly pry the slag removal cover to see if there is a fire. If there is a fire, it means that the oil has not been discharged, the slag removal door must be locked quickly Continue to heat the slags; if it is not on fire, remove the slagging door quickly, seal the external door, and let the furnace rotate in the direction of Slagging for slagging. When the slag is discharged, when it is turned to 45 °, start the winch quickly and pull outwards, then it can be pulled out easily, otherwise the wire rope can not be pulled out.

Online

Online consultation of solutions

Phone

+86-13523737997

Wechat

Scan to add my
WeChat account

TOP