15 tpd Waste Tire to Oil Pyrolysis Machiner

Waste tire to oil pyrolysis machinerymain operating process :

1. Use mechanical waste plastic to enter the reactor and close the inlet to prevent gas flow out
2. Carbon, wood or fuel heating reactor, the reactor is generally 200-300 degrees began cracking reaction, when the waste tires vaporized into oil vapor.
3. Hydrocarbons entering the condensing system are liquefied into oil and collected in the tank unit. Our system has a negative pressure device, he can greatly improve the production of pyrolysis oil.
4. At atmospheric pressure can not be liquefied petroleum gas as fuel for combustion returned to the reactor, not only energy saving and environmental protection,
5. After the oil production is completed, the reactor will be cooled. When the temperature drops to 40 degrees, the carbon black will be removed automatically or manually.

For waste tire to oil pyrolysis machinery main are as follows:

1. Reactor manufactured according to the standard, using 16mm thick boiler steel pipe and arc pressure head, can withstand high pressure and high temperature.
2 .High standard 3-step welding process, not easy to crack, long service life.
3.Pinion rotation device, small power, no direct contact with the reactor, heat transfer less easily deformed.
4. The tertiary cooling system uses a tube condenser, also known as a heat exchanger, which is currently the most commonly used and best performing condenser in the oil industry. Can ensure that the cracked oil and gas fully cooled, high oil production.
5. Safety device oil-water separator, water seal, vacuum device, to ensure the safe and efficient operation of equipment.

Strength of Lefilter waste tyre recycling plant pyrolysis Equipment

A. We can supply hydraulic feeding system,which can shorten the feeding time,save labor,reduce costs,improve production efficiency.With power strength 80 ton and 15 kw motor ,it's competitive than other factories.

B. No leaking and safe with special high temperature flexible graphite packing.

C. Fully enclosed carbon black discharging system. Automatic discharging by the reactor move forward or back-forward.No pollution caused by carbon black and will not flying out when discharging. D.Good quality on raw material: Reactor material is Q345R,which is used for furnace professionally,it has better performance under high temperature working environment than Q245R others used. Reactor shell is Q235B material,and filled with refractory matters that can keep hot during the heating in good efficiency as well as the direct heating system to save energy and cost. E.Our pyrolysis plant is equipped with anti-explosion device,safety valves,emergency valves,pressure and temperature meters,as well as the alarming system to avoid emergency happens. F. Environmental-friendly. a:Emission Standard:Adopting special gas scrubbers to remove acid gas and dust from smoke . b:Smell during operation:Fully enclosed during the operation c:Water pollution:No pollution at all. All water are recycling used,after making the oil cool,then flow into water pool then reused. d:Air pollution:no air pollution,the waste gas can be discharged into flue gas pool,it's closed. e:Solid pollution:No solid pollution.All the solid after pyrolysis is the crude carbon black and steel wires which can be deep-processed or sold directly with its value.

G.Box condenser is produced with 8 pcs 133mm tubes and 17 pcs 108 tubes,25 tubes totally can guarantee the high yield and not easily blocked .The length of oil gas will be arround 180m in the tubes and have enough time to cooling down the oil gas to oil.

Workshop

Packing and Shipping

Client Visiting

Successful cases

Contact us.